How to make a simple computer network with Virtual box

Create a virtual computer network with my post box right to agan2 all that has just one computer but want to learn to make the network (including me). Here's the explanation how to make it :

1. First - all make sure that your computer has installed the virtual box if you can not directly download here ::: HERE ::: Or Mirror link :::HERE:::
2. If you've installed the virtual box, now you need to install the operating system on a virtual box (which is not yet know how Next post) would I demonstrated this is using Windows 7.
3. Virtual Open box, on the choice of setting windows 7 then click on the toolbar above, or can right click on the operating system already installed (Windows 7) and select the settings as shown below.  

 

4. Then a new window will appear Windows 7 - setting, then the submenu on the left-click Network as shown below.

 5. Adapter 1 click on the box next to Enable writing network adapter to power the adapter and then in the dropdown menu attached to select Host-only adapter and the Name dropdown menu select VirtualBox host-only adapter and click OK.

Note:
- NAT (network address translation): NAT settings allow internet service host (computer installed virtualbox) can be used by the guest (OS installed on virtualbox) without the need for further regulation.

- Bridged adapter: Enables the guest OS that is used to connect kejaringan by regulating the host IP address and the guest will look outside dijaringan as host.

- Internal Network: Similar to the bridged adapters.

- Host-only Adapter: Only connect the host to the guest computer.

6. Click Start on the toolbar above and pending guest Win7 boot, we first configure the IP address for the host to get into the Network and Sharing Center and click Change Adapter Settings and double-click the VirtualBox Host-Only Network.

 
 note:

Ethernet Host-Only Network automatically added to one ethernet hosts when VirtualBox installed on the computer and are useful when we put the host-only network adapters on the guest OS settings.

7. A window will appear VirtualBox Host-Only Network Status and then click Properties and then on the window VirtualBox Host-Only Network Properties, double-click on Internet Protocol Version 4 (TCP / IPv4) as shown.

8. Click on Use the following IP address, and set its IP, as in the example I have given the IP address 192.168.1.1 on the host and click OK.

9. Now set the IP address on the guest by going to Network and Sharing Center and click on Change adapter settings and click on Local area conection.

10. In the local area conection Properties window, click Properties and then double click on Internet Protocol Version 4 (TCP / IPv4) click on Use the following IP address and set the IP address, the guest I give the IP address 192.168.1.2 (255.255.255.0) and click Ok.

Now that we've managed to create a simple network using virtualbox, to test trying to do the ping command from Host to Guest or vice versa if successful will be no reply as below.

 Enjoy it the tutorial...
reff : http://bangun11-tkj.blogspot.com/2013/04/cara-membuat-jaringan-komputer.html